As tablets gain traction in the workplace, this universal tablet mount allows the user to place their tablet on a monitor mount or monitor arm. Tablets from 7 to 12 inches are supported by this tablet mount, with a maximum tablet width depth of 0.6 inches.

• Supports any tablet from 7” to 12” (without case) including the Apple iPad range, Google Nexus, Samsung, Sony, Kindle and many more


• Supports any tablet up to 0.6 inches in thickness


• Can be attached to any monitor mount with a 100x100mm VESA mounting hole pattern


• Protective soft rubber backing protects tablet


• Spring loaded hook for quick and secure tablet installation/removal


• Tablet can be installed in either landscape or portrait orientation (please check position of camera and ports to ensure access is not blocked by the spring loaded hook)


• Tablet size generally refers to diagonal display sizing and should only be taken as a guide. The spring loaded hook supports any device with a minimum width or height of 140mm (5.5") and a maximum of 255mm (10") - based on these figures some smaller tablets and phablets may only be supported when clamped on the long edge of the device (portrait mode) and some larger devices may only be supported when clamped along the short edge (landscape). Please refer to the technical specifications document for more information.

• Length, single unit (inches): 8.3
• Width, single unit (inches):7
• Weight, single unit (lbs): 1.6
• Quick release mechanism: Yes
• Mounting hardware included: Yes
• Material: Steel and plastic
• Spring loaded hook for quick and secure tablet installation/removal
• Warranty 2 years